How to Build a Poker Table
The DOWNLOADABLE PDF FILE contains step-by-step instructions for building a basic, but high quality poker table. The table measures 48" x 96" and has a 4" wide rail. This will provide comfortable seating for up to 10 players. This table will cost approximately $400-$425 to build.
Materials
- 3 - 4'x8' Sheet of ¾ " MDF or high quality plywood
- 10 - 8' 1x4 Select Pine Boards
- 1 - 6' 1x10 Select Pine Board
- 4 - Black Strap Hinges
- 4 - Table Leg Braces
- Quality Wood Glue
- 1 can - 3M Hi-Strength 90 Spray Adhesive (green can)
- 1 qt. of Paint
- 1 qt. of Polyurethane
- 8 - 2" Bolts with Tee Nuts
- 1 - Box of 1 ¼ " Black Drywall Screws
- 16 - 4" Black Drywall Screws
- Wood Filler
- ¼" Closed Cell Foam 96"x48"
- 22' 1' Thick Rail Foam - 3# Firmness
- Vinyl 55" x 108"
- Table Cloth 55" x 108"
- Optional - 2 Foldable Banquet Table Legs (Remove 7 - 8' 1x4 Select Pine Boards)
Tools
- Jig Saw
- Miter Saw with Finish Blade
- Belt Sander with 120 grit sand paper
- Orbital Sander with 180 grit sand paper
- Router
- ¼ " Roundover with bearing" Router Bit
- Drill
- Drill Bits (3/4" Spade, 1/8" wood, ¼ " wood, 5/16" wood)
- Countersink
- Clamps
- Utility Knife
- Hammer
- Staple Gun
- Staples
- Paint Brush or Sprayer